manualshive.com logo in svg

EBRO ARMATUREN SBU, Original Assembly Instructions With Operating Instructions And Technical Appendix

Share
Download
EBRO ARMATUREN SBU Original Assembly Instructions With Operating Instructions And Technical Appendix Download Page 24

 

 

Operating instructions - SBU IO-Link   
 

 

 

 
Page 24 of 50 

 

                 

C02  Scope of delivery 

The SBU IO-Link  was conceived and assembled at EBRO ARMATUREN Gebr. Bröer GmbH and is 
suitable for detecting the signals of the CLOSED / OPEN state of a pneumatic quarter turn actuator. 
In the form supplied by us as an incomplete machine, the SBU IO-Link  is intended to be mounted on a 
pneumatic quarter turn actuator.  
 
The scope of delivery generally includes this device and the associated original assembly and operating 
instructions. 

Immediately upon receipt of the SBU IO-Link , check that it corresponds to your order and is complete.  

Complain immediately: 

 

to the delivery company if there is visible transport damage. 

 

to EBRO ARMATUREN GmbH if there are visible defects or if anything is missing. 

Summary of Contents for SBU



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands