Ebinger DONKEY PLUS, Instruction Booklet

Page: 23 / 61

DE EN FR ES IT
23
In case of further malfunctions, the error can be localised using the listed step. Repair work may
only be carried out by an authorised service centre.
Incorrect operation, maintenance or repair may result in damage to the electrics or mechanics of the unit.
LED indicator flashes green, yellow, red
simultaneously
Thumb lever not in zero position
► Jammed or blocked, Bring to zero position
Problem persists
► Replace thumb lever
LED indicator on the thumb lever lights up (green,
yellow or red), but electric wheelbarrow does not move
Automatic switch-off activated
(automatically after 20min of non-use)
► Switch off and switch on again
LED indicator flashes ► See separate description
Battery indicator drops quickly while driving
and returns to normal when not in use
Tolerance of the display by 10-15% normal
► No error
Battery indicator shows 100% after charging, but drops
to low but drops to a low charge level after a short time.
Battery worn out
► Renew
Battery indicator does not show increased charge level
after charging charge level
Charger defective (see also chapter 7)
► Renew
Charging socket no contact
► Replace plug/cable
Battery defective
► Renew
Unit runs, but grinding noises when driving Check drum brake
►Clean if dirty
►set too tight
Unit runs, but noises at the motor/ gearbox Check engine mount
► Renew
Motor turns audibly, but no drive Transmission motor to gearbox interrupted
► Repair
Lank wheels have play on the axle Bearing defective
► Renew
Swivel castors have play on the fork axle Close fork axle
9. Trouble shooting