2-WAY FULL-RANGE LOUDSPEAKER
90° × 60°
See
NOTES TABULAR DATA
for details
CONFiGURAtiON
Subsystem:
Transducer
Loading
LF 1× 10-in cone
Vented
HF 1× 1-in exit, 1.75-in voice coil Horn-loaded
compression driver
Operating Mode:
Amplifier Channels
External Signal Processing
Single-amp LF/HF
High pass filter
PERFORMANCE
Operating Range: 65 Hz to 20 kHz
Nominal Beamwidth:
(rotatable)
Horz 90°
Vert 60°
Axial Sensitivity
(whole space SPL):
LF/HF 95 dB
65 Hz to 20 kHz
input impedance
(ohms):
Nominal
Minimum
LF/HF 8
6.9 @ 200 Hz
input taps
(With ACC-TXVFR Transformer installed):
70V
100V
LF/HF 128W / 64W / 32W / 16W
128W / 64W / 32W
High Pass Filter: High Pass =>60 Hz, 12 dB/octave Butterworth
Accelerated Life test:
LF/HF 63.2 V
500 W @ 8 ohm
Calculated Axial Output Limit
(whole space SPL):
Average
Peak
LF/HF 122 dB
128 dB
ORDERiNG DAtA
Description
Part Number
EAW VFR109i Black 2041019-90
EAW VFR109i White 2041035-90
Optional Accessories
EAW ACC TX VFR [ACC-TXVFR] 2039034
Eye Bolt Forged Shoulder M10 X 1.5 X 37mm 0029818
EAW U-Bracket V10U BLK [UBKT-V10U] 2038756
EAW U-Bracket V10U WHT [UBKT-V10U] 2039218
FEAtURES
• Two-way, full range loudspeakers
• Beamwidth-matching crossover point
• User-rotatable horn for optimized pattern control
• Easy lift handles (Black version only)
DESCRiPtiON
The new VFR “i” revision brings the VF concept more fully into the EAW
product line. VFR “i” Series black versions provide a handle designed
into the rear of the cabinet. An installation only white version comes
without handles or a pole mount cup.
The VFR109i two-way, full range loudspeaker system includes a direct-
radiating, vented, 10-in LF cone transducer and a 1-in exit / 1.75-in
voice coil HF compression driver loaded with a large, square, user-
rotatable 90x60 coverage pattern horn built on the classic MK Series
horns. These horns deliver exceptional high frequency dispersion, and
their square shape lets users “rotate the enclosure around the horn” to
maintain directivity in a horizontal configuration.
Because VF Series full range systems (VFR/VFM) use HF sections similar
to those developed for the MK Series, EAW engineers could employ the
same revolutionary “beamwidth-matching” internal passive crossover/
filter networks that set the MK Series apart from all other two-way sys-
tems. If powered by an EAW-specified amplifier or via a UX Series digital
signal processor, the VFR109i can enjoy the benefits of EAW Focusing, a
technology that eliminates the anomalies inherent in the time domain
of any loudspeaker.
The VFR109i black version includes traditional portable features such
as a pole-mount cup, parallel NL4 4-terminal connector, barrier strip
connector, an optional transformer and handles that accept accessory
covers for permanent installation. The white, installation-only versions
omit handles and the pole-mount cup but include NL4 connector, bar-
rier strip connector, an optional transformer, and multiple mounting
points. The new design leaves the enclosure sides completely smooth
and attractive.
Six year warranty.
Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com
July 2013
Part Number: RD0753 Rev B00
EAW products are continually improved. All specifications are therefore subject to change without notice.
VFR109i
Specifications
