Installation Instructions
UB80 BRACKET
EAW DWG NO 480351 (0)
1. Inventory
Before beginning installation, inventory kit to items listed.
Item
EAW P/N Qty
Description
1
606018
1
Bracket
2
102246
2
Screw, 3/8-16 x 1-1/2 SHCS, Black
3
105062
2
Washer, Neoprene, 3/8 I.D. X 1 O.D.
4
105010
2
3/8 Washer, Flat, Black
5
105011
2
3/8 Washer, Lock, Black
WARNING: Installation should only be done by an experienced technician. Improper installation may cause
serious injury. The surface where the bracket/cabinet is to be fastened must have enough structural integrity
to support 250 pounds.
2. Mounting the Bracket
Due to various construction methods and materials used today, the hardware for securing the
bracket to the mounting surface is not supplied. It is recommended that you consult a building
professional for the proper mounting hardware before mounting the bracket.
3. Removing the Shipping Hardware
Remove the flat head screws from the sides of the cabinet using a 7/32 Allen wrench.
4. Which Holes to Use
There are two holes
in each bracket arm.
Use the inner hole.
5. Hanging the Cabinet
A. Holding the cabinet
in position, insert
the screw with its
lock washer and
flat washer, through
the bracket’s right
side arm inner
hole then through
the neoprene washer
and into the cabinet’s
threaded mounting hole
and hand tighten.
B. Repeat step A through the
left side arm’s bracket hole.
C. Position cabinet and tighten
both screws with a 5/16
Allen wrench.
EASTERN ACOUSTIC WORKS
1 Main Street • Whitinsville, MA 01588 • Phone (800) 992-5013 • FAX (508) 234-8251
3
4
3
4
2
(2) NEOPRENE WASHERS
EAW P/N 105062
MOUNTING BRACKET
UB80 EAW P/N 606018
(2) SCREW 3/8-16 X 1-1/2
SHCS 18-8 BLK
EAW P/N 102246
(2) LOCK WASHER 3/8
EAW P/N 105011
3.00
(2) FLAT WASHER 3/8
EAW P/N 105010
UB80
4.56
4.56
4.56
20.14
3X Ø.31 THRU