Acoustic Performance Partnership
Eastern Acoustic Works
MK2294
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email [email protected]
TECHNICAL SPECIFICATIONS
MK2294
AC
O
US
TIC
AL
PER
FORMANCE PA
RTN
ER
SH
IP
One Main Street, Whitinsville, MA 01588 • (508) 234 - 6158 • FAX (508) 234 - 8251 • Email [email protected] • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB#888177 MK2294/2p/4/1/00 • Printed In USA
DESCRIPTIVE DATA
Configuration
2-way, Full Range
Powering
Biamplified
LF Subsystem
1x 12-in, Vented
HF Subsystem
1x 1.4-in Exit/75mm Voice Coil
Compression Driver on Constant
Directivity Horn
Coverage Angles (h
°
x v
°
)
90 x 45
Cabinet Type (shape)
Trapezoidal
Enclosure Materials
Baltic Birch Plywood
Finish
Wear-resistant Textured Black
Paint
Connectors
2x 2-Terminal Barrier Strip
Suspension Hardware
(13) 3/8”-16 Threaded Mounting
Points (3 each on top and bottom,
2 per side, 3 on rear)
Grill
Powder Coated Perforated Steel
Dimensions
Inches Millimeters
Height
30.00
762
Width (front)
15.54
395
Width (back)
8.23
209
Depth
14.75
375
Trapezoid Angle
15 Degrees per Side
Weights
Pounds
Kilograms
Net Weight
60
27.2
Shipping Weight
72
32.7
DESCRIPTION
EAW’s MK2294 two-way loudspeaker system provides high
output, low distortion sound reinforcement for a wide range
of permanently installed audio applications.
The 12-in low frequency cone and 1.4-in exit/75mm voice
coil high frequency compression driver provides higher out-
put and lower distortion plus enhanced power handling ca-
pabilities.
EAW’s advanced beamwidth matching crossover selects a
crossover point where the HF horn’s beamwidth matches that
of the woofer. The result is more even off-axis frequency
response (power response) for more complete coverage.
The MK2294 is a biamplified loudspeaker requiring the use
of pre-configured MX Series processor settings.
APPLICATION
The MK2294 was designed to support the widest possible
range of permanent installations and was optimized for use
in distributed systems.
Its high output capabilities let it cover a large seating area
in such applications as houses of worship, themed enter-
tainment venues, arenas, stadiums and nightclubs.
The comprehensive system of integral 3/8”-16 threaded
mounting points permit safe, load-rated suspension.
