5 Installation
5.4 Mounting
MICRO PANEL XV400 5.7"/8.4"
12/2014 MN04802009Z-EN
www.eaton.com
47
5.4.4
Mounting a device with stainless steel front (standard mounting and mounting to IP65)
1
Select the mounting position of the device as described in Chapter 5.2.2 Requirements for the
mounting position,
2
Prepare a mounting cutout for the device at the selected position:
Mounting cutout 198
142 mm (±1 mm)
Material thickness at the mounting cutout 2…5 mm
3
Fit the supplied seal:
Abb. 32 Mounting cutout for 5.7" devices
Abb. 33 Seal
CAUTION
Poor sealing
Poor sealing resulting from the twisting of the seal or due to protruding securing
tabs.
Insert the seal correctly.
198.0
+1/-1
142.0
+1/-1