Appendix
8.1 Technical data
8.1.5 Approvals and declarations
The following specifications apply to all XV300 units.
Approvals and declarations
cUL
UL 61010-2-201, UL File No. E205091
CE
XV300 units comply with all applicable European Union (EU) Directives and feature the
CE marking.
Explosion protection
II 3D Ex tc IIIC T70°C IP6x:
Zone 22, Category 3D
l
IP5x for devices of the group IIIB (non-conductive dust)
l
IP6x for devices of the group IIIC (conductive dust)
For front mounting
mandatory according to specifications built-in fastening material
-XV-303-70-..: each 6 x Holding bracket with set screw
-XV-303-10-..: each 10 x Holding bracket with set screw
For rear (panel) mounting
mandatory according to specifications screwed at all attachment positions.
-XV-313-70-..: each 8 x
-XV-313-10-..: each 10 x
Applied standards and directives
EMC (relevant for CE)
2004/108/EEC 2014/30/EU
IEC/EN 61000-6-2
Interference immunity for industrial environments
IEC/EN 61000-6-4
Emitted interference for industrial environments
Explosion protection (in relation to CE)
ATEX Directive 94/9/EG 2014/34/EG
IEC/EN 60079-0
Explosive atmospheres: equipment - general require-
ments
IEC/EN 60079-31
Explosive atmospheres: equipment dust ignition pro-
tection by enclosure «t»
Safety
IEC/EN 60950
Safety of Information Technology Equipment
UL 61010-2-201
Industrial Control Equipment
→ Section "Technical conditions for acceptance by
Underwriters Laboratories Inc. (UL)", page 34
Product standards
DIN EN 60898-1:2006-03
Electrical accessories - Circuit-breakers for over-
current protection for household and similar install-
ations
EN 50178
Electronic equipment for use in power installations
IEC/EN 61131-2
Programmable controllers: Equipment requirements
and tests
Mechanical shock
resistance
IEC/EN 60068-2-27
15g /11ms
Vibration
IEC/EN 60068-2-6
Displacement amplitude: 5–9 Hz: 3.5 mm; 9–60 Hz:
0.15 mm
Acceleration amplitude: 60–150 Hz: 2 g
XV300
12/15 MN048017 EN www.eaton.eu
85
