9 Technical data
9.5 Interfaces
HMI/PLC XV-102
08/2016 MN04802004Z-EN
www.eaton.com
75
Tab. 36 POW/AUX (power supply interface for SmartWire-DT)
1) 1) If contactors and/or motor starters with a total current draw > 3 A (DIN VDE 0641, Part 11 and IEC/EN 60898) or > 2 A (UL
508 and CSA-22.2, No. 14) are connected, an EU5C-SWD-PF1 or EU5C-SWD-PF2 power feeder module needs to be used.
9.5.2.2
SWD (SmartWire-DT interface)
Tab. 37 SWD (SmartWire-DT interface)
1) If SmartWire-DT modules with a total current draw > 0.7 A are connected,
an EU5C-SWD-PF2 power feeder module needs to be used.
Repetition rate
1 s
Status indication
Yes (LEDs)
Property
XV-102
Property
XV-102
SmartWire-DT supply voltage U
VP
Rated operating voltage (internally converted
supply voltage U
POW
)
14.5 V DC ±3 % (14.0…15.0 VDC)
Current
Max. 0.7 A
1)
Short-circuit rating
Yes
Number of SmartWire-DT modules on the Smart-
Wire-DT network
Max. 99
SmartWire-DT module address setting
Automatic
Baud Rate
125 kbit/s
250 kBit/s
(= default settings)
