Eaton XP-504, Manual, Page: 77 / 98

9. Maintenance
9.1 Cleaning and maintenance
9. Maintenance
9.1 Cleaning and maintenance
9.1.1 Cleaning multi-touch touch panel
The display needs to be cleaned on a regular basis.
CAUTION
POINTY, SHARP OBJECTS AND CORROSIVE LIQUIDS
When cleaning the XP-504:
l
Do not use any pointy or sharp objects (e.g., knives).
l
Do not use aggressive or abrasive cleaning products or solvents.
Make sure that no liquids get into the XP-504 unit (short-circuit haz-
ard) and that the XP-504 unit is not damaged in any way.
Clean the frame and the display with a clean, soft, damp cloth.
9.1.2 Replacing the battery
The battery in the Panel PC can be replaced.
EXPLOSION HAZARD
LITHIUM BATTERY
The lithium battery inside the XP-504 may explode if handled incor-
rectly.
Dispose of the XP-504 unit professionally.
EXPLOSION HAZARD
LITHIUM BATTERY
Make sure to only replace the battery with the following battery
model: Panasonic BR2032 (190mAh, 3V), from Panasonic. Using any
other battery
may pose a fire or explosion hazard.
CAUTION
The battery may explode when handled improperly.
Do not charge or disassemble the battery. Do not dispose of the
battery in a fire.
The battery will be in a battery holder.
XP-504 08/2021 MN048028EN Eaton.com
78