4. External connections
4.3 Ethernet
4.3 Ethernet
The Ethernet port on the XH-303 Web Panel is used as a communication interface.
The Ethernet controllers support transfer rates of 1000 Mbit/s, 100 Mbit/s and 10
Mbit/s.
When the green LED lights up, this means that there is a LINK, i.e., that an active net-
work is connected and has been detected.
When the yellow LED flashes, this means that data is being transferred.
Fig. 10: RJ-45 socket, 8-pole, 2 LEDs (CAT5e/6), LAN1
For the network, use shielded twisted-pair (STP) cables only.
Max. cable length: 100 m.
CAUTION
FORCES ON THE ETHERNET INTERFACE
Communications may be affected and the connection's mechanical
components may be damaged, if the Ethernet interface is subjected
to strong vibrations or the RJ45 plug-in connection is subjected to
pulling.
l
Protect the RJ45 plug-in connection from strong vibrations.
l
Protect the RJ45 plug-in connection from tensile forces at the
socket.
To commission the communication between the XH-303 and the device, follow the
description for the connected device.
44
XH-303
09/22 MN048029EN Eaton.com
