manualshive.com logo in svg

Eaton WaveLinx, User And Programming Manual, Page: 99 / 141

Share
Download
Eaton WaveLinx User And Programming Manual Download Page 99

99

 

 

WaveLinx User Manual

www.eaton.com/wavelinx

Test mode will automatically time out after 30 minutes or may be manually cancelled by switching the status button to the OFF position.

ote:

N

When demand response is active, all areas will show a demand response indicator at the top of the screen. This will show during test mode or during an 

active demand response signal.

Demand response indicator

Quick Links for Common Questions

 

•

I am not using demand response. How do I disable it? See the answer on page 138.

 

•

I want to use demand response. How do I make the connection to my demand response equipment? See the answer on page 138.

Performing  Administrator Tasks

The Wireless Area Controller allows for advanced administrator functionality using built-in internal webpages. This section describes how to 

log in to the webpage and perform the following functions:

 

•

System administration

 

•

Set the system location, time, date and time zone

 

•

Manage user accounts and passwords

 

•

Rename the Wireless Area Controller

 

•

Backup and restore databases

 

•

View disclaimers and license agreements

 

•

Firmware administration

 

•

View and update firmware/software of the Wireless Area Controller

 

•

View or update firmware of WaveLinx devices

 

•

Advanced network administration

 

•

Administer Wi-Fi access point settings

 

•

Administer other Wi-Fi settings

 

•

Administer Ethernet setting

 

•

Change DNS settings

In addition to internal webpage functions, this section also describes how to perform the following administrative and mobile application 

tasks:

 

•

Reboot the Wireless Area Controller

 

•

View application version details

 

•

Update the mobile application

 

•

Replace and synch WaveLinx devices

 

•

Use the Wireless Area Controller PAIR button advanced functionality

Summary of Contents for WaveLinx














































































































































Reviews:

No comments