manualshive.com logo in svg

Eaton WaveLinx, User And Programming Manual, Page: 20 / 141

Share
Download
Eaton WaveLinx User And Programming Manual Download Page 20

20

 

 

WaveLinx User Manual

www.eaton.com/wavelinx

5:  In the log in screen, enter the username and password for the administrator user (these are case sensitive).

 

•

Default Username: 

WclAdmin

 

•

Default Password: 

wclAdmin

Select the option to save credentials to remember the login credentials automatically on this device for future connections and then select 

the log in button. After a brief refresh period, the areas list will be displayed indicating a successful connection.

Enter the 
Username: WclAdmin
Password: wclAdmin

If desired, select the option 
to save the credentials for 
future login

Select the log in button

After a successful login, the 
areas list will be displayed

Quick Links for Common Questions

•  I previously logged in on my mobile device as a personal control user and saved my credentials. Now I need to log in as the administrator 

user. How do I switch users? See the answer on page 137.

•  How do I change the default password for the user? See the answer on page 105.

•  How do I create additional users? See the answer on page 105.

•  When I open the mobile application, I get an error message. What should I do? See the answer on page 137.

Summary of Contents for WaveLinx














































































































































Reviews:

No comments