Tripp Lite by Eaton SmartPro Advanced User Guide 614-40195—Rev 01
17
C
Chhaapptteerr 44 IInntteerrffaacceess aanndd C
Coom
mm
muunniiccaattiioonn
44..11
C
Coonnttrrooll P
Paanneell
The screen provides useful information about the UPS itself, load status, events, measurements and settings.
Table 11. Control Panel Details
NORMAL MODE
LOAD:35% 1050W
1.
Power ON indicator (green)
2.
On battery indicator (orange)
3.
Alarm Indicator (red)
4.
Escape
5.
Up
6.
Down
7.
Enter
8.
On/Off button
The following table shows the indicator status and description :
Table 12. LED Indicator Details
Indicator
Status
Description
Green
On
The UPS is "On" and the load is protected.
Orange
On
The UPS is in battery mode and the load is protected.
Flashing
The battery voltage is below the warning level.
Red
On
The UPS has an active alarm or fault. See
for additional information.
44..22
LLC
CD
D D
Deessccrriippttiioonn
The LCD screen has 2 lines, each line may show 16 characters maximum. The first line shows UPS mode,
which may be standby mode, normal mode, battery mode, backup end mode or fault mode. The second line
shows measures. The backlight LCD automatically dims after 5 minutes of inactivity. Press any button to
restore the screen.
Summary of Contents for Tripp Lite SmartPro Series
