14
Tripp Lite by Eaton SmartPro Advanced User Guide 614-40195—Rev 01
33..66
C
Coonnnneeccttiioonn w
wiitthh aa FFlleexxP
PD
DU
U ((P
Poow
weerr D
Diissttrriibbuuttiioonn U
Unniitt))
The FlexPDU is an optional module. To order, contact your Customer Service Representative.
Table 8. FlexPDU Connection Steps
1.
SmartPro 1500 : Use the power cable of the protected equipment.
SmartPro 3000 connect the UPS input socket to the AC power
source using the cable (13) supplied.
2.
Connect the input socket on the FlexPDU module (40) to the UPS
outlet (3) using the cable (24) supplied. The cable and the
connectors are marked in red.
3.
Connect the equipment to the outlets (41) on the FlexPDU module.
These outlets differ, depending on the version of the FlexPDU
module.4. Fit the connection securing system that prevents the plugs
from being pulled out accidentally.
33..77
C
Coonnnneeccttiioonn w
wiitthh aa H
HoottS
Sw
waapp M
MB
BP
P ((M
Maaiinntteennaannccee B
ByyP
Paassss))
The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the
connected loads (HotSwap function).
The HotSwap MBP is an optional module. To order, contact your Customer Service Representative.
Table 9. HotSwap MBP Connection Steps
1.
Connect the input socket (48) on the HotSwap MBP module to the
AC power source using the cable (13) supplied.
2.
Connect the UPS input socket (2) to the “UPS Input” (47) on the
HotSwap MBP module, using the cable (26) supplied. This cable
and the connector are marked blue.
3.
Connect the UPS outlet (3) to the “UPS Output” (46) on the
HotSwap MBP module, using the cable (26) supplied. This cable
and the connector are marked in red.
4.
Connect the equipment to the outlets (42) on the HotSwap MBP
module.
These outlets differ, depending on the version of the HotSwap
MBP module.
Do not use UPS outlets (4) to supply equipment
because use of switch (45) on the HotSwap MBP
module would cut supply to the equipment.
Summary of Contents for Tripp Lite SmartPro Series
