Eaton Static Transfer Switch 2000A 3-Pole Installation and Operation Manual 164001127—Rev 01
17
C
Chhaapptteerr 33 IInnssttaallllaattiioonn P
Pllaannnniinngg
This chapter has planning information for the 3-pole STS 2000A. Additional specifications and planning
information can be found in the following:
•
Customer Communications Connections
•
GUIDE SPECIFICATION Eaton PDI 2000 Amp 3-Pole Static Transfer Switch
33..11
S
Syysstteem
m EEnncclloossuurree
The STS 2000A enclosure is designed for the data center or telecommunications environment. The enclosure is
shown in
, and enclosure details are listed below.
•
NEMA-1 rated
•
Dimensions: 90"W x 60"D x 84"H
•
Enclosure is primed and painted with suitable semi-gloss enamel both inside and out. The Color is Pearl
White with black top venting.
•
Large cable entry/exit openings top and bottom:
–
Top entry: 33.75" x 29.00"
–
Bottom entry: 37.50" x 25.50"
•
STS weight is approximately 5400 lbs.
33..22
C
Clleeaarraanncceess aanndd S
Seerrvviiccee A
Acccceessss
•
Ventilation clearances required:
–
6" both sides
–
24" overhead
•
Service clearances required:
–
30" front and rear service clearance
–
Front and rear access is required for installation and maintenance.
–
All input and output power connections must be made from rear of the unit.
•
For ease of servicing:
–
All control and logic components are mounted separately from the power components.
–
All MCCBs and MCSWs are draw-out type for ease of replacement.
33..33
C
Coooolliinngg
The STS uses forced air cooling and rejects heat through removed protected openings in the top and bottom of
all modules.
33..44
EEnnvviirroonnm
meennttaall S
Sppeecciiffiiccaattiioonnss
•
Storage temperature range: -40° to +80°C
•
Storage Altitude: Up to 40,000 feet above sea level
•
Operating temperature range: 0° to 40°C
•
Operating altitude:
Summary of Contents for STS 2000A
Page 8: ......
Page 120: ...16400112701 164001127 01...
