2 Installation
2.6 Connect SmartWire-DT®
SmartWire-DT Gateway EU5C-SWD-DP
01/13 MN120001Z-EN
www.eaton.eu
17
2.6 Connect SmartWire-DT®
▶
Grab the end of the SWD line that has an arrow pointing away from the
blade terminal.
▶
Plug this blade terminal into the gateway's SmartWire-DT connection.
To do so use the SmartWire-DT cable SWD-4-100LF8-24 and the SWD-4-
8MF2 relevant blade terminal or prefabricated cables of type SWD-4-(3/5/
10)F8-24-2S.
Figure 11:
Connection SmartWire-DT
￫
Detailed instructions explaining how to assemble a SmartWire-
DT external device plug (SWD4-8SF2-5) onto an 8-pin Smart-
Wire-DT cable can be found in "SmartWire-DT The System",
MN05006002Z-EN, in the "Assembling external device plug
SWD4-8SF2-5" section.
SWD4-…LF…
SWD4-8MF
