Effective May 2018
Supersedes 91647
Instruction Sheet
IL211024 EN
Sliding Keyboard/Pedestal Bracket
Overview
•
The
Sliding Keyboard/Pedestal Brackets
are designed to
accommodate both 30" (762mm) and 36" (914,4mm) deep
worksurfaces.
•
They can be used with laminate, phenolic and maple
worksurfaces.
•
Both units can only be used with 36"” (914,4mm) thru 96"
(2438,4mm) Linear TechBenches.
•
Each unit is rated for 150 lbs (330,0 kg).
•
The Keyboard Bracket has a mounting hole pattern to accept a
“KB” Cobra style mounting track.
•
The Pedestal Bracket has (2) sets of hole patterns. One hole
pattern is for a C38X series Pedestal, the other is for a “KB”
Cobra style keyboard track.
•
A safety locking feature prevents accidental disengagement on
the units.
•
A synthetic grease must be applied to both front and rear
TechBench
™
stiffeners as well as the Sliding Keyboard/Pedestal
Bracket assemblies. This will ensure smooth motion of loaded
units.
•
A knob located on the front of each Sliding keyboard/Pedestal
Bracket locks the unit in place during use.
