Eaton SC100, Operation Handbook, Page: 40 / 86

SC100 Handbook
34
Copyright © 2008-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-63C August 2011
System Alarm Configuration
The following system alarm parameters can be configured.
Parameter Description Where to find:
Severity Set to Disabled if no indication is required when the
alarm is active. Or, set to the required alarm priority.
See details on page
32 .
DCTools: Alarms > Alarm
State
DO Mapping A If required, select a digital output (relay) that will be
operated when the alarm is active.
DO Mapping B If required, select a second digital output (relay) that
will be operated when the alarm is active.
AC Fail
Recognition Period An ac supply failure condition must be continuously
active for this period before an AC Fail alarm is
generated.
DCTools: Alarms > Alarm
Configuration
Enable High Float
Tracking The High Float alarm threshold will be adjusted when
the operating voltage is changed by a voltage control
process.
High Float
Threshold High Float alarm is activated if the bus voltage is
above this value.
Enable Low Float
Tracking The Low Float alarm threshold will be adjusted when
the operating voltage is changed by a voltage control
process.
Low Float
Threshold Low Float alarm is activated when the bus voltage is
below this value.
High Load
Threshold High Load alarm is activated if the bus voltage is
above this value.
Low Load
Threshold Low Load alarm is activated if the bus voltage is below
this value.
Battery Fuse Fail
Active State Specifies if the alarm activates from an open or closed
contact.
Battery
Temperature High
Threshold Battery Temperature High alarm is activated if the
battery temperature is above this value.
Battery
Temperature Low
Threshold Battery Temperature Low alarm is activated if the
battery temperature is below this value.
System Overload
Type See details on page 35 .
System Overload
Recognition Period See details on page 35 .
System Overload
Threshold See details on page 35 .
AC High Threshold AC High alarm is activated if the ac voltage is above
this value.
AC Low Threshold AC Low alarm is activated if the ac voltage is below
this value.