21
Eaton RF-System
© 2015 Eaton Electrical Group
If you wish to permanently delete a note, click on 'X' and confirm the warning notice with YES.
Insert group frames
This function offers the option of drawing frames with titles (max. 21 characters) in the workspace.
These can be used for optical grouping of the device groups when the Project Topology function is
not used.
The function Insert group frames can be executed in several ways:
1. Menu Insert -> Group frames
2. Right-click on blank MRF workspace -> Create group frames
3. Tool bar ->
As with the selection mode, the function remains active until it is deactivated (menu re-selection of
Insert -> Group frames or using the tool bar ->
)
After the frame has been moved (left-click and hold, then release in desired end position) the MRF
will request the input of a frame title. A maximum of 21 characters are possible and at least one
symbol must be used. Once you have confirmed with OK, the frame will be displayed.
Summary of Contents for RF System 2.42
