155
Eaton RF-System
© 2015 Eaton Electrical Group
After the successful configuration and the activation of the option “The MEP device has been
configured and can now be used” a connection to another device can be drawn.
MEP device version: Shows hardware and software version of the MEP device
Meter SW version: Shows the version and serial number of the connected Smart Meter
Further the results of the version verify is displayed. The version verify shows if the software
version of the MEP device is equal to the scanned version in the MRF project.
see
RF Radiator thermostat:
The RF Radiator thermostat serves the purpose of controlling a radiator. Depending on the mode it
is configured by the MRF it can be used in 2 different ways.
1. Stand-alone Operation
In this mode the RF Radiator thermostat is not connected to a central device and will do everything
on its own. Set temperature and weekly time programs will be set directly on the device. The
configuration can be done by the MRF but also on the device itself using the menu.
Summary of Contents for RF System 2.42
