Eaton RF System 2.42 Manual Download

Page: 125 / 244

125

Eaton RF-System

Manager has been connected to.

Now go back to MRF and right click on your Room Manager and select „Load new

software…“

The following dialog window is shown:

Select the file you want to download (*.rm)

10.

Select the correct COM-interface number

11.

Click on „Load software“

If the software has been loaded successful a window pops up that informs you and the Room
Manager restarts.

You have to rescan the Room-Manager so that the MRF eventually detects changes made by the
software update!

Also see

Overview of the Room Manager

Info about the timer programmes of the Room Manager

The Room Manager mainly uses timer programmes for controlling operation modes with time
based functions.
Dependant for what function the timer programme is used the dialog windows are different.

Window for the timer programme of a room:

Summary of Contents for RF System 2.42





















































































































































































































































Search results

Summary of Contents for RF System 2.42

Reviews:

Related manuals for RF System 2.42

Brands by name

Popular brands

Eaton RF System 2.42, Manual

Search results

Summary of Contents for RF System 2.42

Reviews:

Related manuals for RF System 2.42

Brands by name

Popular brands