Eaton RE Series, User Manual

Page: 4 / 23

RE SERIES_ RevA
3/5/2022
v
3
This document outlines the recommended practices for assembling and installing the RE Series server enclosure. The standard server
enclosure is a high-quality design for storage of industry standard (EIA/ECA-
310), 19” rack -mount hardware, which includes servers,
voice, data, networking, power protection equipment, KVM, etc., which are used in the data center rooms. 19" Standing Server Rack
is the ultimate solution designed and engineered for demanding data center environments. To achieve optimum versatility within the
server rack, users can set multiple depths throughout the rack by adjustable 19” mounting rails mounted on heavy duty side
supports. Horizontally divided side panels provide ease of access and convenient post-installation maintenance. Over 78%
perforations on front and rear door enable optimum airflow within the rack. Flat-pack option enables savings up to 60% in the
transport cost and warehouse space. Please follow the installation instructions closely; assembly should be performed using the
recommended tools.
Available RE Series Enclosures
Server Enclosure
Height[RMU] Height[H] Width[W] Depth[D]
Premier Essential
REV276100PB REV276100EB 27 1325 600 1000
REV426100PB REV426100EB 42 1992 600 1000
REV426110PB REV426110EB 42 1992 600 1100
REV426120PB REV426120EB 42 1992 600 1200
REV426127PB REV426127EB 42 1992 600 1270
REV428100PB REV428100EB 42 1992 800 1000
REV428110PB REV428110EB 42 1992 800 1100
REV428120PB REV428120EB 42 1992 800 1200
REV428127PB REV428127EB 42 1992 800 1270
REV456100PB REV456100EB 45 2125 600 1000
REV456110PB REV456110EB 45 2125 600 1100
REV456120PB REV456120EB 45 2125 600 1200
REV456127PB REV456127EB 45 2125 600 1270
REV458100PB REV458100EB 45 2125 800 1000
REV458110PB REV458110EB 45 2125 800 1100
REV458120PB REV458120EB 45 2125 800 1200
REV458127PB REV458127EB 45 2125 800 1270
Note: ● Above products can be shipped fully assembled or Flat packed
● Customized dimension also optional
Caution:
Before installing this product, please note the following safety information:
1. Always lower the leveling feet of the enclosure.
2. Always install equipment starting from the bottom of the enclosure to the top.
3. Always install the heaviest equipment in the bottom of the enclosure.
4. Always have at least two persons during assembling of the enclosure.
Attention:
Avant d’installer ce produit, veuillez noter les informations de sécurité suivantes :
1. Abaissez toujours les pieds de nivellement de l’enceinte.
2. Installez toujours l’équipement à partir du bas de l’enceinte vers le haut.
3. Installez toujours l’équipement le plus lourd au fond de l’enceinte.
4. Avoir toujours au moins deux personnes lors de l’assemblage de l’enceint e.
Overview