Eaton Rapid Link RAMO5, Manual

Page: 27 / 218

1 Rapid Link system 5
1.5 UL Standards Compliance
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
23
1.5.2 RASP5
RASP5 motor starters have been tested in accordance with UL 61800-5 and
are approved as “listed”.
Table 5: RASP5
Table 6: Short circuit current rating for individual and group protection
Property Value
Input voltage 480 V AC
Output voltage, maximum 480 V AC
Rated operating voltage for brake
control 180 V DC
230 V AC
400 V AC
Output current 2.5 A (RASP5-2…S1)
4.3 A (RASP5-4…S1)
5.6 A (RASP5-5…S1)
8.5 A (RASP5-8…S1)
Input current 2.4 A (RASP5-2...)
4.1 A (RASP5-4...)
5.3 A (RASP5-5...)
7.8 A (RASP5-8...)
Frequency 50/60 Hz
Phases 3
Output frequency 0 - 320 Hz
Field bus input voltage 30 V DC
Motor protection integrated,
At 105 % full load
Thermistor monitoring integrated
Degree of protection NEMA 12/NEMA 12K
Ambient temperature, maximum 40 °C without fan
55 °C with fan
With fuse (UL listed) Circuit-breakers (UL listed)
with built-in
local discon-
nect switch without built-
in local
disconnect
switch with built-in
local discon-
nect switch without built-
in local
disconnect
switch
Voltage 480 V AC 480 V AC 480 V AC 480 V AC
Short-circuit current,
maximum 30 A 30 A 32 A 32 A
Interrupting Rating 10 kA 65 kA 10 kA 10 kA
￫
Devices with an integrated disconnect switch are approved for
use as “motor disconnects” (“lockout/tagout”).