Eaton ProtoAir Start-Up Guide
Page 20 of 66
6.2 Greengate/iLumin: Discover and Configure Light Panels Connected to the
ProtoAir
For Greengate, c
lick on the “Start Discovery” button to enter the port, network address, panel
address and number of panels for the device.
For iLumin
, click on the “Start Discovery” button to enter the port, network address and iLumin
config file to load for the device.
NOTE: To generate an iLumin config file, consult the iLumin manual.
Figure 16: Greengate Discovery Window
Figure 17: iLumin Discovery Window
