Eaton ProtoAir Start-Up Guide
Page 16 of 66
5.4 Updating Network Settings
From the Web Configurator, Click the Network Settings tab to open the Network Settings page for the
ProtoAir.
Modify the IP Address (N1 IP Address field) of the ProtoAir Ethernet port.
If necessary, change the Netmask (N1 Netmask field).
If necessary, change the IP Gateway (Default Gateway field).
NOTE: If the ProtoAir is connected to a managed switch/router, the IP Gateway of the ProtoAir
should be set to the IP Address of that managed switch/router.
Click the “System Restart” button at the bottom of the page to apply changes and restart the
ProtoAir.
Unplug Ethernet cable from PC and connect it to the network switch or router.
Record the IP Address assigned to the ProtoAir for future reference.
Figure 12: IP Address Settings via Web GUI
