Eaton ProtoAir Start-Up Guide
Page 15 of 66
5.3 Select System
After setting the PC on the same subnet as the ProtoAir, open a web browser on the PC and
enter the IP Address of the ProtoAir; the Ethernet default address is 192.168.1.24.
o
The Select System Page will appear the first time the FieldServer is accessed.
Select the desired protocol.
The Web Configurator landing page will now appear.
NOTE:
If the wrong protocol was selected, click the “Clear Configuration” or “Switch to another
product” button to reset the GUI and go back to the Select System Page.
Figure 10: Select System Page
Figure 11: Web Configurator GUI