manualshive.com logo in svg

Eaton PowerXL DX-NET-DEVICENET, Manual, Page: 20 / 62

Share
Download
Eaton PowerXL DX-NET-DEVICENET Manual Download Page 20

3 Installation

3.2 Notes on the documentation

16

DX-NET-DEVICENET

02/14 MN04012005ZEN

www.eaton.com

3.2 Notes on the documentation

Documents containing installation instructions:

•

IL4020010Z instruction leaflet for DA1 variable frequency drive
in size FS2 and FS3

•

IL4020011Z instruction leaflet for DA1 variable frequency drive
from size FS4

These documents are also available as PDF files on the Eaton Internet 
website. They can be quickly located at

www.eaton.com/moeller

 

￫

 Support

by entering the document number as the search term.

3.3 Notes on the mechanical surface mounting

Figure 7: Make sure that the equipment is de-energized

when performing installation work

DANGER

Make sure that the equipment is fully de-energized when 
performing the handling and installation work required to 
mechanically set up and install the fieldbus connection.

￫

When installing the DX-NET-DEVICENET fieldbus connection, it 
will be necessary to open the DA1 variable frequency drive‘s 
enclosure. We recommend that this mounting work be carried 
out before the electrical installation of the variable frequency 
drive.

L1/L L2/N L3

DC-

Summary of Contents for PowerXL DX-NET-DEVICENET































































Reviews:

No comments