Page 2
9130 UPS-EN
Class A EMC Statements
Requesting a Declaration of Conformity
Units that are labeled with a CE mark comply with the following harmonized standards and EU
directives:
Harmonized Standards: IEC 61000-3-12
l
EU Directives: 2006/95/EC, Council Directive on equipment designed for use within certain
l
voltage limits
2004/108/EC, Council Directive relating to electromagnetic compatibility
The EC Declaration of Conformity is available upon request for products with a CE mark.
For copies of the EC Declaration of Conformity, contact Eaton Power Quality or check Eaton website:
www.powerquality.eaton.com
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK
- Observe the warning associated with the risk of electric shock symbol.
CAUTION: REFER TO OPERATOR’S MANUAL
- Refer to your operator’s manual for additional
information, such as important operating and maintenance instructions.
Do not discard the UPS or the UPS batteries in the trash.
This product contains sealed lead acid batteries and must be disposed as it's explain in this manual.
For more information, contact your local recycling/reuse or hazardous waste center.
This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE) in
the trash. For proper disposal, contact your local recycling/reuse or hazardous waste center.
Information, advice, help.
Directives references
This UPS is classified in the C2 category according to:
EMC:
IEC 62040-2 Ed2: 2005
Safety:
IEC 62040-1: 2008 (IEC 60950-1)
Performance: IEC 62040-3: 1999
For immunity and safety tests, see Table 22 p. 33.
Emission testing level as C2 (class A) category according to CISPR 22 Ed5.2:2006 (EN 55022).
WARNING:
in a residential environment, this product may cause radio interference in which case the
user may be required to take additional measures.
