72
Eaton
®
Power Xpert
®
9395P-1200 Installation and Operation Manual 164000500—Rev 11
7.
Using hardware from the external wiring terminal hardware kit (see
), connect phase A, B, and C
bypass input power wiring from the utility source to the bypass input terminals in the ISBM section. See
paragraph
UPS System Power Wiring Preparation
for wiring and termination requirements.
8.
If wiring a distributed bypass system, proceed to Step 9; otherwise, proceed to Step 11.
9.
Using hardware from the external wiring terminal hardware kit (see
), connect phase A, B, and C
wiring from the output terminals of each UPS unit to the customer-supplied tie cabinet or load distribution
panel. See paragraph
UPS System Power Wiring Preparation
for wiring and termination
requirements.
10. Proceed to paragraph
11. Using hardware from the external wiring terminal hardware kit (see
UPS System Power Wiring Preparation
), connect phase A, B, and C power wiring from output
terminals to the critical load. See paragraph for wiring and termination requirements.
12. Proceed to paragraph
Summary of Contents for Power Xpert 9395P-1100/1100
Page 8: ......
Page 214: ...16400050011 164000500 11...