Eaton Power Xpert 9395P-1100/1100, Installation And Operation Manual, Page: 21 / 214

Eaton ® Power Xpert ® 9395P-1200 Installation and Operation Manual 164000500—Rev 11 3
Figure 2. Eaton 9395P-1200 Three UPM Plus 1 FI-UPM
ISBM SECTION UPM SECTION FI-UPM
NOTE Startup and operational checks must be performed by an authorized Eaton Customer
Service Engineer, or the warranty terms become void (see Section
1.10 Warranty ). This
service is offered as part of the sales contract for the UPS system. Contact an Eaton
service representative in advance (usually a two-week notice is required) to reserve a
preferred startup date
11..22 U UP PS S S Sttaannddaarrdd FFeeaattuurreess
The UPS has many standard features that provide cost–effective and consistently reliable power protection.
The descriptions in this section provide a brief overview of the UPS standard features.
11..22..11 IInnssttaallllaattiioonn FFeeaattuurreess
Each UPS section is shipped separately. The sections are mechanically and electrically joined at the installation
site, and can be permanently bolted to the floor.
Power and control wiring can be routed through the top or bottom of the cabinet with connections made to
easily accessible terminals. External sensing and monitoring control wire must be installed in accordance with
Class 1 wiring methods.
11..22..22 C Coonnttrrooll P Paanneell
The control panel, located on the front of the UPS, contains a liquid crystal display (LCD) and pushbutton
switches to control the operation of the UPS and to display the status of the UPS system. See
Chapter 7 UPS Operating Instructions , for additional information.
11..22..33 C Cuussttoom meerr IInntteerrffaaccee
• Building Alarm Monitoring Up to five inputs in the UPS are available to connect the facility's alarm
system contacts. Some system configurations may limit the number of inputs available. The UPS uses
these inputs to monitor the building alarms in addition to the UPS status. See
Chapter 8 Communication
for additional information.
Introduction