Eaton PM3, Instruction Leaflet

Page: 2 / 20

2
Instruction Leaflet IL012002EN
Effective March 2013
Instruction Leaflet for Modbus Power Monitoring/
Metering Module (PM3) for FD, JG, and KD/LG
Circuit Breakers and Motor Circuit Protectors
EATON CORPORATION
www.eaton.com
1. Installation and Specifications
 CAUTION
DO NOT ATTEMPT TO INSTALL OR PERFORM MAINTENANCE ON
EQUIPMENT WHILE IT IS ENERGIZED. DEATH OR SEVERE PERSONAL
INJURY CAN RESULT FROM CONTACT WITH ENERGIZED EQUIPMENT.
ALWAYS VERIFY THAT NO VOLTAGE IS PRESENT BEFORE PROCEEDING.
Figure 1. Attaching the Endcap.
Table 1. End Cap Kits.
Breaker Frame End Cap Kit Cat # End Cap Kit Style #
FD KPEKM1 6606C63G04
FD KPEK1 67B9101G03
JG FJ3RTWK 68C2837G09
JG FJ3RTDK 68C2837G07
KD KPEKM3 5102A14G02
KD KPEK3 5102A14G01
LG L3RTWK 66A4562G0 5
1. Attach endcap.
Figure 2. Inserting the Unit into the Breaker.
Figure 3. Locking the Unit in Place.
2. Insert unit into breaker.
Breaker must be in OFF or TRIPPED position for assembly.
3. Push down.