Eaton PDI JCOMM, Installation And Operation Manual

Page: 21 / 50

Eaton PDI JCOMM Enclosure Installation and Operation Manual P-164001107—Rev 01 11
C Chhaapptteerr 44 JJC CO OM MM M IInnssttaallllaattiioonn
JCOMM units must be installed by licensed electricians or by Eaton-authorized technicians.
A Eaton-trained technicians provide on-site support for software setup and network connection for new
JCOMM installations.
For planning questions, installation problems, or post-installation support contact Eaton, see paragraph
2.7 Getting Help .
44..11 IInnssttaallllaattiioonn K Kiitt
Upon receipt of your JCOMM shipment:
1. Open your JCOMM shipping package(s).
2. Check the packing list against the contents of the kit to make sure that all items in the packing list have
been included.
3. Check the enclosure, internal frame, boards, and connectors for damage.
4. Report any missing or damaged parts to Eaton support.
The contents of your JCOMM Installation Kit will include items from the following table:
Table 2. JCOMM Installation Kit Contents
Option Part Description Additional Part Information or Quantity
JCOMM Enclosure and Display Options
JCOMM with WaveStar
Color Monitor A JCOMM unit can have various part numbers
depending on features.
JCOMM with no display A JCOMM unit can have various part numbers
depending on features.
Cable and CT Kits
Panelboard Kits (Branch Circuits): 1-4 Panelboard Kits
(1) Panelboard Kit, 42-
circuit panelboard Cable harness for branch circuit split-core CTs:
connectorized cable harness for 21 (60A) CTs in
lengths of 5, 10, 15, or 20 ft.
Branch circuit split-core CTs ≤ 60A 42
Main Circuit Cable Kits (Main or Subdistribution Feeds): 0-4 Main
Circuit Cable Kits