Eaton Network-M3, User Manual

Page: 195 / 294

Reading device information in a simple way
Servicing the Network Management Module – 195
•
4.
•
•
•
•
•
Default Gateway
Save the changes.
4.14 Reading device information in a simple way
4.14.1 Web page
The product information is located in the , specifically with the button on the top of the diagram:
4.15 Subscribing to a set of alarms for email notification
4.15.1 Example #1: subscribing only to one alarm (load unprotected)
Follow the steps below:
1. Navigate to Contextual help>>>Settings>>>General>>>Email notification settings .
2. Press the button New to create a new configuration.
3. Select:
Active: Yes
Configuration name: Load unprotected notification
Email address: myaddress@mycompany.com
Notify on events: Active
Always notify events with code: 81E (Load unprotected)