Eaton Network-M2, User Manual

Page: 170 / 268

Upgrading the card firmware (Web interface / shell script)
Servicing the Network Management Module – 170
1.
2.
4.6 Upgrading the card firmware (Web interface / shell script)
4.6.1 Web interface
To upgrade the Network module through the Web interface, refer to the section: Firmware upgrade through the Web interface .
4.6.2 Shell script
4.6.2.1 Prerequisite
Shell script uses the following tools: sshpass, scp.
To get it installed on your Linux host, use the following commands.
Debian/Ubuntu
$ sudo apt-get install sshpass scp
RedHat/Fedora/CentOS
$ sudo dnf install sshpass scp
Make shell script executable:
$ chmod 700 install_updatePackage.sh
4.6.2.2 Procedure
To upgrade the Network module using:
Open a shell terminal on your computer (Linux or cygwin; meaning real or emulated Linux operating system).
Use the shell script install_updatePackage.sh
Usage: 'install_updatePackage.sh' [options]
Upgrade tool
Mandatory arguments are -f, -i, -u and -p
-h : show help
-f <path> : path of the upgrade file
-u <username> : username of a card user allowed to start upgrade
-p <password> : user password
-i <ipaddress> : ip address of the card to upgrade
-r : reboot the card after upgrade
4.6.3 Example:
$ ./install_updatePackage.sh -u admin -p <mypassword> -f FW_Update.tar -i <cardIpAddress> -r
For instructions on accessing to the latest firmware and script, refer to: Accessing to the latest firmware and script