1
91648
L i n e a r T e c h B e n c h ™
P a r t i a l S h e l f
I n s t a l l a t i o n
Linear TechBench™ Partial Shelf
Rev. __ Date:
TOOLS REQUIRED
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
Figure 1
1. Determine the location for the Partial Shelf and attach
the Brackets to the TechBench™ as shown in figure 1.
NOTE
: Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3/8”
pancake phillips head screws (provided). See figure 2.
Figure 2
Right Hand Bracket
Hooks
Slots
#10-24 x 3/8” phillips
head screws
Installation sheet
Tools required
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
1. Determine the location for the partial shelf and attach the
brackets to the TechBench™ as shown in figure 1.
NOTE:
Be sure that the Brackets are at the same level
Tap the top of each Bracket with a plastic mallet to ensure
that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3/8” pancake
phillips head screws (provided). See figure 2.
Linear TechBench
™
partial
shelf installation
1
91648
L i n e a r T e c h B e n c h ™
P a r t i a l S h e l f
I n s t a l l a t i o n
Linear TechBench™ Partial Shelf
Rev. __ Date:
TOOLS REQUIRED
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
Figure 1
1. Determine the location for the Partial Shelf and attach
the Brackets to the TechBench™ as shown in figure 1.
NOTE
: Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3/8”
pancake phillips head screws (provided). See figure 2.
Figure 2
Right Hand Bracket
Hooks
Slots
#10-24 x 3/8” phillips
head screws
Linear TechBench partial shelf
Slots
Hooks
Right hand bracket
#10-24 x 3/8" phillips
head screws
Figure 1
Figure 2
