Eaton IQ 150S, User & Installation Manual

Page: 139 / 234

IM02601006E www.eaton.com 7-9
IQ 150S/250S 7: Using the Submeter
7.2.5.1: Configuring the Scroll Feature
When in Auto Scroll mode, the meter performs a scrolling display, showing each parameter for 7
seconds, with a 1 second pause between parameters. The parameters that the meter displays
have been selected through Eaton Meter Configuration
software (refer to Chapter 5 for instructions).
To enable or disable Auto-scrolling:
1. Press the
Enter
button when SCrl is in the A window. The Scroll YES
screen appears.
2. Press either the
Right
or
Down
button if you want to access the
Scroll no screen. To return to the Scroll YES screen, press either but-
ton.
3. Press the
Enter
button on either the Scroll YES screen (to enable
auto-scrolling) or the Scroll no screen (to disable auto-scrolling).
4. The CT- n screen appears (this is the next Configuration mode
parameter).
NOTES:
• To exit the screen without changing scrolling options, press the
Menu
button.
• To return to the Main Menu screen, press the
Menu
button twice.
• To return to the scrolling (or non-scrolling) parameters display, press the
Menu
button three
times.
A
B
C
-
-
-
MENU ENTER
A
B
C
-
-
-
MENU ENTER