Eaton IQ 150S, User & Installation Manual

Page: 137 / 234

IM02601006E www.eaton.com 7-7
IQ 150S/250S 7: Using the Submeter
7.2.5: Using Configuration Mode
Configuration mode follows Reset: Energy on the Main Menu.
To access Configuration mode
1. Press the
Menu
button while the meter is auto-scrolling parameters.
2. Press the
Down
button until the Configuration Mode option (CFG) is in the A window.
3. Press the
Enter
button. The Configuration Parameters screen appears.
4. Press the
Down
button to scroll through the configuration parameters: Scroll (SCrL), CT, PT,
Connection (Cnct) and Port. The parameter currently ‘Active,” i.e., configurable, flashes in the A
window.
5. Press the
Enter
button to access the Setting screen for the currently active
parameter.
NOTE:
You can use the
Enter
button to scroll through all of the Configuration parameters and their
Setting screens, in order.
Press
Enter
when CFG is in A window - Parameter screen appears -
Press
Down
- Press
Enter
when
Parameter you want is in A window
6. The parameter screen appears, showing the current settings. To change the settings:
• Use either the
Down
button or the
Right
button to select an option.
• To enter a number value, use the
Down
button to select the number value for a digit and the
Right
button to move to the next digit.
A
B
C
-
-
-
MENU ENTER
A
B
C
-
-
-
MENU ENTER