Eaton IQ 150S, User & Installation Manual

Page: 124 / 234

IM02601006E www.eaton.com 6-8
IQ 150S/250S 6: Ethernet Configuration
6.3.3: Detailed Configuration Parameters
Certain parameters must be configured before the Ethernet interface can function on a network.
The following procedure can be locally or remotely configured.
Use a Telnet connection to configure the unit over the network. The Ethernet interface's configura-
tion is stored in meter memory and is retained without power. The configuration can be changed
at any time. The Ethernet interface performs a reset after the configuration has been changed and
stored.
Establish a Telnet connection to port 9999:
NOTE:
If your PC is running
Windows 7, you need to enable Telnet
before using it.
1. Open the Control Panel.
2. Select Programs and Features.
3. Select Turn Windows features
on or off.
4. Check the box for Telnet Client.
5. Click OK. The Telnet client is
now available.
1. From the Windows Start menu, click
Run
and type 'cmd'.
2. Click the
OK
button to bring up Windows's Command Prompt window.
3. In the Command Prompt window, type:
telnet 10.0.0.1 9999
and press the
Enter
key.
NOTE:
Be sure to include a space between the IP address and 9999.
The following parameters appear, for example:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>telnet 10.0.0.1 9999