manualshive.com logo in svg

Eaton INDGW-M2, User Manual

Share
Download
Eaton INDGW-M2 User Manual Download Page 79

Settings

Contextual help of the web interface  –  79

3.7  Settings

3.7.1  General

3.7.1.1  System details

3.7.1.1.1  Location

Text field that is used to provide the card location information.

Card system information is updated to show the defined location.

3.7.1.1.2  Contact

Text field that is used to provide the contact name information.

Card system information is updated to show the contact name.

3.7.1.1.3  System name

Text field that is used to provide the system name information.

Card system information is updated to show the system name.

3.7.1.1.4  Time & date settings

The current date and time appears in the footer at the bottom of the screen.

You can set the time either manually or automatically.

a  Manual: Manually entering the date and time

1. Select the time zone for your geographic area from the time zone pull-down menu or with the map.

2. Select the date and time.

3. Save the changes.

b  Dynamic (NTP): Synchronizing the date and time with an NTP server

1. Enter the IP address or host name of the NTP server in the NTP server field.

Summary of Contents for INDGW-M2





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands