Eaton i-onEX Series, Administrator'S And User Manual

Page: 57 / 116

i-on40 & i-onEX Range 4. Administration
Page 51
The keypad gives a double
“beep”
confirmation tone. The keypad
display shows:
The control unit has learned the
identity of the Hold Up Alarm and
linked it with your access code.


You cannot register more than one radio HUA per user. If the control unit
has already learned that radio HUA then you will hear a low tone and the
display
will show the message “Hold Up Alarm already in use”.
If you have a radio HUA and want to know who it belongs to then use the
Test – User Hold Up Alarms
menu option, see page 57 .
Deleting Remote Controls, Two-way Keyfobs, Tags and
Radio HUAs
If you have lost a remote control, two-way keyfob, prox tag or radio Hold Up
Alarm assigned to you then you should delete it from the system to make
sure that no unauthorised person can use it.
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press

.


If you are a Master or Admin User:
(otherwise, go to step 6)
5. Press

.


a) Press

.


b) Press

.


c) Press

or

. until the bottom
line of the display shows your own
user name.

