User Menu Options
Page 34
the
Users
menu is not available at all. The menu map on page 28 shows
the user types that have access to
Users
menu, and the options available.
See page 38 for a description of each option.
Adding users
If you are a master or admin user, you can use
Users
– Add User
to add
new users. When adding a new user, you can:
Specify the user's name, type, partitions (if applicable) and access
code. Each user must have a unique access code.
Assign a proximity tag, remote control, radio hold-up device, medical
pendant and social-care pendant (depending on user type
− a shunt
code user can have only a proximity tag; duress and BMS users can
have none of these devices).
If you do not wish to assign these devices, most user types can assign
the devices to themselves at a later date using the
Users
option
(depending on user type
–
see the menu map on page 28).
A user can have only one proximity tag, remote control, hold-up
device, medical pendant or social-care pendant. No two users can
have the same device.
Note:
The level-4 user can be created only by the installer. There can
be only one level-4 user.
To add a new user:
1.
Select
Users
– Add User
.
2.
The next available default user name is displayed:
If you wish, edit this default name of the user (12 characters
maximum). If required, please refer to page 30 for details of how to
edit text. Press
to continue.
3.
The default user type is displayed (normal user):
Press
or
to select the user type (see page 2 for a description of
each user type). Press
to continue.
