Eaton Holec Capitole 40, User Manual

Page: 70 / 101

Capitole 40
70 1991.901 G01 002
4. TECHNICAL DATA AND SPARE
PARTS
4.1 TECHNICAL DATA
4.1.1 Torque values for electrical and
mechanical connections using screws
and bolts
The table does not apply to lubricated connections.
Connections using cylinder-head screws
Quality minimum 5.6
Thread diameter M3 M3.5 M4 M5 M6 M8 M10 M12 M16
Spanner width
Assembly torque Nm 0.7 1.0 1.5 3.0 5.0
Checking torque Nm 0.6 0.8 1.25 2.6 4.25
Connections using hexagonal bolts
Quality minimum 5.6
Thread diameter M3 M3.5 M4 M5 M6 M8 M10 M12 M16
Spanner width sw10 sw13 sw17 sw19 sw24
Assembly torque Nm 7.0 14.0 28.0 40.0 60.0
Checking torque Nm 6.0 11.9 23.8 34.0 51.0
Connections using hexagonal socket-head bolts with large head
Quality minimum 8.8
Thread diameter M3 M3.5 M4 M5 M6 M8 M10 M12 M16
Spanner width sw4 sw5 sw6 sw8 sw10
Assembly torque Nm 7.0 9.0 20.0 40.0 60.0
Checking torque Nm 6.0 7.7 17.0 34.0 51.0
Torque values for QSA connection
connection range tighten torque
max 70 mm
2
box 1 with cable clamps 10 Nm (sw6 - hexagonal socket)
max 70 mm
2
box 1 with cable clamps 2.5 Nm (screw driver)