iv
Harmonic correction unit (HCU2) and electronic VAR injector (EVI2) active filters
OperatiOnal manual
MN156001EN October 2015 www.eaton.com
Safety information
Important information
Read these instructions carefully and look at the equipment
to become familiar with the device before trying to install,
operate, service or maintain it. The following special
messages may appear throughout this bulletin or on the
equipment to warn of potential hazards or to call attention
to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning”
safety label indicates that an electrical hazard exists which
will result in personal injury if the instructions are not
followed.
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury .
WARNING
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury .
CAUTION
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to
physical injury.
otee:
N
Electrical equipment should be installed, operated,
serviced and maintained only by qualified personnel.
No responsibility is assumed by the manufacturer
for any consequences arising out of the use of this
material.
A qualified person is one who has skills and
knowledge related to the construction, installation,
and operation of electrical equipment and has
received safety training to recognize and avoid
the hazards involved.
As standards, specifications and designs change
from time to time, please ask for confirmation of
the information given in this publication.
