22
FIELD CUTTING INSTRUCTIONS
1.
With hacksaw, cut the track to the desired length.
2.
Remove all burrs from the track and buss bars.
3.
Reinstall the end cap.
If additional Mounting holes are required, follow this procedure to drill holes:
1.
Locate the desired mounting hole(s) location on the inside of the track section along
the center.
2.
Using an 1/8 inch diameter drill hole through the track.
3.
Using a countersink bit, countersink the hole so that the mounting screw will be
flush with the surface of the track.
4.
Remove all burrs and install track as described in this instruction.
TROUBLESHOOTING
EXPANSION - ADDING MORE TRACK KITS
Use connector between two tracks. (Fig. 6)
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT
NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE.
Eaton warrants to customers that, for a period of five years from the date of purchase,
Halo HU20 series products will be free from defects in materials and workmanship.
The obligation of Eaton under this warranty is expressly limited to the provision of
replacement products. This warranty is extended only to the original purchaser of the
product. A purchaser’s receipt or other proof of date of original purchase acceptable to
Eaton. This is required before warranty performance shall be rendered.
This warranty does not apply to Eaton products that have been altered or repaired or
that have been subjected to neglect, abuse, misuse or accident (including shipping
damages). This warranty does not apply to products not manufactured by Eaton which
have been supplied, installed, and/or used in conjunction with Eaton products. Damage
to the product caused by replacement bulbs or corrosion or discoloration of brass
components are not covered by this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL EATON BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER
IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR
LOST PROFITS; NOR SHALL THE LIABILITY OF EATON FOR ANY CLAIMS OR DAMAGE
ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE MANUFACTURE, SALE,
DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF EATON PRODUCTS, OR
SUPPLY OF ANY REPLACEMENT PARTS THEREFORE, EXCEED THE PURCHASE PRICE OF
EATON PRODUCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED
TO REMOVE OR INSTALL FIXTURES.
To obtain warranty service, please contact Eaton at 1-800-334-6871, press option 2
for Customer Service, or via e-mail [email protected] and include the
following information:
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem
All returned products must be accompanied by a Return Goods Authorization Number
issued by the Company and must be returned freight prepaid. Any product received
without a Return Goods Authorization Number from the Company will be refused.
Eaton is not responsible for merchandise damaged in transit. Repaired or
replaced products shall be subject to the terms of this warranty and are inspected
when packed. Evident or concealed damage that is made in transit should be reported
at once to
the carrier making the delivery and a claim filed with them.
Reproductions of this document without prior written approval of Eaton are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at [email protected].
PROBLEM
CAUSE/SOLUTION
Light does not come ON
No power to the fixture
• Check to see if circuit breaker tripped
• Confirm wall switch is ON
TURN OFF POWER BEFORE
CONTINUING
If system does not appear to turn ON,
check the connection of the pucks and
connectors by moving them until connec-
tion is established
Light blinking
Wiring to the unit is loose
• Confirm wiring is properly secured
• If light still does not come ON after
checking wiring connections
contact Customer Service
Temperature is too high or too many pucks
are installed
• Remove pucks
• Move driver away from high
heat source
Mounting Surface
Direct connector wires over cabinet
edge
Extension assembly
Do not use more than 1 driver per system (up to 8 pucks)
Fig. 6
Yes
No
Fig. 5
