115
Front Section Disassembly
4
FSO-2405
2nd Ed. 02/07
Front Section
FSO-2405/31
6
FSO-2405/30
FSO-2405/29
FSO-2405/28
4
5
3
7
1. Disassemble the rear section (see “Rear
Section Disassembly”).
2. Shift the 1st speed gear.
WARNING! Remove the shift lug roll pin
BEFORE removing the threaded actuator
of shifting cam.
3. Remove the shift lug roll pin by pushing it
forward into the housing.
NOTE: Use a 6 mm diameter pin punch.
4. Remove the plug, spring and spherical
actuator pin of the cam threaded actuator.
5. Remove the shift positioning plug, spring and
ball.
6. Remove the thirteen capscrews that attach the
intermediate housing to the front housing.
7. From inside the front housing, remove the
capscrew that attach the front housing to the
intermediate housing.
Summary of Contents for Fuller FSO 2405 K
