Eaton FO-6406A-ASX, Driver Instructions, Page: 9 / 22

6
Operation
Drive Mode
Depending on the transmission model and Shift Control configuration, there
may be alternate forward starting gears available. While the vehicle is stopped
in Drive, the up/down buttons are used to change the starting gear. This selec-
tion is used until it is changed again, or the AutoShift is powered down.
In Drive mode, all upshifts and downshifts are performed automatically based
on vehicle and transmission conditions.
The driver can advance a shift (by about 75 rpm) by pressing the proper up/
down button (up for upshifts, down for downshifts) when the transmission is
within 75 rpm of the load based shift point.
The Gear Display shows the status of the shift:
• The current gear is displayed solid.
• At the start of the shift, the current gear is displayed solid until the
transmission is pulled to the neutral position.
• While the transmission is in neutral and synchronizing for the target
gear, the target gear is flashed.
• When the shift is complete, the new current gear is displayed solid.