background image

 

 

Zero 88 FLX S Lighting Console 

– User Manual 

Page 

35

 of 

47

 

“HTP” means the channel faders will only affect a 
channel if they are higher than anything else affecting 
that channel (so, if a channel is programmed at 50% in 
a cue, the channel fader will only affect that channel 
when it’s above 50%).  

“LTP” means the channel faders can “catch” the 
intensity (by taking the fader above 50% in the above 
example) and then pull it back down to 0% and keep 
control of the channel. 

“Show Record & Update Window” can be changed to 
decide when these two windows should be shown during 
programming. 

“When held” means the windows will only be displayed 
when the  Record  or  Update  buttons are held for 

around half a second. 

“On internal display” means the windows will be shown 
on the internal display as soon as the  Record  or  

Update  buttons are pressed. 

“On external display” means the windows will be shown 
on the external display (FLX S48) as soon as the  

Record  or  Update  buttons are pressed, but only on 

the internal monitor if the buttons and pressed and held. 

“On both displays” means the windows will appear on 
both displays as soon as the  Record  or  Update  

buttons are pressed. 

“MFF Window Playback button action” defines what 
happens when you press a Playback Button in the MFF 
window. By default this opens the Playback’s Setup 
Window, but it can instead match the physical button 
action (for example Flash or Tap Tempo), or set a Fader 
Level. 

“Auto Select Channel on Fader Movement” automatically 
selects a channel when a channel fader is moved. This can 
be disabled if you wish. 

Attribute Settings (Colour, Beamshape, Position) 

These options allow you to change various settings for 
each attribute. The same windows can also be opened 
outside of the Setup Window, by pressing  Setup  and the 

attribute tab together. 

For example,  Setup  + 

 Colour 

 together will open the 

Attribute Settings for colour, as shown below. 

 

The “Attribute Settings” window for the Colour attribute

 

The options in each Attribute’s window are the same (apart 
from colour, which has one extra option), but the setting for 
each option can be changed per attribute independently. 

“Wheel mode” allows you to change how the encoder 
wheel will affect the selected fixtures. The options are 
explained below. 

A secondary “shifted” option can be 

chosen whilst holding down the  Shift  key on the 

console, which allows you to select how the encoder 
will work when you rotate it whilst holding  Shift . 

“Absolute” will change all the selected fixtures to be 
exactly the same value for that wheel’s parameter. 
For example, if all the moving lights have different 
gobos, changing the gobo wheel in absolute mode 
will switch them all to the same gobo, and then alter 
them all together. 

“Relative” will change all the selected fixtures 
relative to the values they currently have. For 
example, if lots of moving lights are all pointing 
centre stage, they are all at different angles. Moving 
them “relative” will move all their Pans and Tilts 
together rather than snapping them all to the same 
angle (which is what “absolute” would do). 

“Fan first” fans the change you make across all the 
selected fixtures, so the first fixture’s parameter 
doesn’t change, the last fixture’s parameter changes 
as expected, and all the fixtures in-between will 
scale between these two values. 

Summary of Contents for FLX S24
















































Reviews: