Zero 88 FLX Lighting Console
–
User Manual
Page
51
of
64
Defaults
Defaults within the Setup menu allows you to change the
default times and settings given when you program Cues
and UDKs. Changing the default settings will never change
Cues or UDKs which have already been programmed.
Only future Cues and UDKs will be affected by a change in
defaults.
The “Defaults” screen within Setup
Default Times
These settings change the default times that cues and
UDKs are recorded with. Both the default fade and default
delay of the Intensity, Colour, Beamshape and Position
attributes can be change in this window (delay options are
not available for UDKs).
Cue 1 of each playback is always recorded with a 0s fade
time by default. This can be changed during the recording
process on the encoders, or after the cue is recorded in the
Playback Window.
Cue Stack Defaults
Clicking
Cue Stack
Defaults…
will open the Playback
Settings window, allowing you to change the default
settings that are applied to any new playbacks. Playbacks
are created when a cue is first recorded into that playback.
For more information about the options available, see “
UDK Options
Clicking
UDK Options
…
will open the UDK Settings
window, allowing you to change the default settings that
are applied to new UDKs.