background image

 

 

Zero 88 FLX Lighting Console 

 User Manual 

Page 

30

 of 

64

 

Cue Settings 

Cue Setting can be changed via the 

Cue Setup

” window. 

To open this, navigate to the settings column of the 
Playback Window, select the cue required, then 
press  Enter  (or double touch/click the field). The Cue 
Setup window appears:  

 

Cue Setup window

 

Trigger (Go, Auto, Timecode etc) 

This option allows you to 

change what’s going to trigger 

each individual cue. By default, this is “Go”, but the 

following options are available: 

GO

 

This option will only trigger the selected cue when 
the  Go  button is pressed. This is the standard way a 
cue is triggered, and is chosen by default. 

Auto (with previous cue)

 

This will trigger the selected cue at the same time as 
the previous cue. For example, when you press  Go  on 
the previous cue, this cue will also be triggered and run 
at the same time. When this option is selected

, a “Wait 

Time” field will appear just below the drop down. This 

allows you to enter a wait time, for example 5 seconds. 
This means the selected cue will be triggered 5 
seconds after the previous cue is triggered, even if the 
previous cue is still running 

as it’s fade time is longer 

than 5 seconds. 

Auto (after previous cue)

 

This option is similar to above, but it will trigger the 

selected cue only once the previous cue’s fade time has 

been completed. Again, when this option is selected, a 

“Wait Time” option

 will appear under the drop down. 

Real Time

 

This option allows you to trigger the cue at a specific 

time in the day (a “real time”). For example, at 8am, or 

7.30pm. 

MIDI

 

This option allows you to trigger the cue at a specific 
time during a MIDI Time Code (MTC) signal. 

For more 

information on MTC, please see 

MIDI Timecode

 on pag

50.

 

Please note: to change the timecode displayed in the cue list window, just 
tap the time displayed along the bottom of the window to cycle through 

the available options (on FLX there’s “Real time” and “MIDI Time Code”).

 

Next cue 

“Next cue”

 is the cue number which automatically gets 

selected after this cue is executed. This functionality is 
very useful if a s

cene is “

cut

 from the show 

 you can tell 

the FLX to skip the cues in that scene and jump straight to 
a different cue. If this field is empty, FLX will automatically 
select cues sequentially. 

Don’t Move on Dark settings

 

This option allows you to disable a specific attribute from 
moving in dark during this specific cue. For example, you 
may not want colour scrollers changing during a very quiet 

scene, so during that scene “Don’t Move Colour” can be 

selected. 

F

or more information about this, see 

Move on Dark

 on page 

25

”.

 

Macros 

Macros allow you to automatically run user macros or 
trigger (and release) other playbacks automatically during 
this cue. For example, if you want a chase on cue 20, you 
could create that chase on a separate playback, and then 
trigger it from Cue 20 in your Master Playback. 

To do this, press the “Add” button next to either of the 

three options. This will open a new window which displays 
all the Macros or Playbacks (depending which you 
selected). Select the Macro / Playback you wish to trigger. 
This will add it into the previous window. You can repeat 
this to trigger multiple macros / playbacks at the same 

time. To remove a macro / playback you’ve added, simply 

select it in this window. Once finished, select 
the 

 OK 

 button. 

Playing back cues 

Before playing back the programmed cues, it

s suggested 

to remove any unrecorded commands from the command 
line by pressing the  Clear  button twice. 

Raising the playback’s fad

er to full will automatically trigger 

the first cue within the playback. 

To output the next memory in the playback, simply press 
the  Go  button. Each time you press it, the console will 
continue down the list one cue at a time. 

Summary of Contents for FLX Lighting Console

































































Reviews: