17
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
3.3 Headset control
The connected headset is controlled by default via the shift menu key sequence, with which the headset’s conversation
operating mode is activated or disabled, as illustrated by the figure below. However, the precondition for this is that the
headset mode is switched on or enabled in the main menu, which is indicated by the superimposition of the icon in the
bottom display line, to the right of the date/time display.
unteren Display-Zeile, rechts neben der Datum-/Uhrzeit-Anzeige, gekennzeichnet wird.
Initial state/idle mode
Conversation headset mode
Expanded control
Annemarie 5008
Please dial
04.02.21 09:01 0:01
Annemarie 5008
04.02.21 09:01
#
T
L
#
T
L
#
T
L
e.g. Input1
(Headset, press)
or
Headset enabled!
Headset operation activated!
The enable check of the headset mode occurs via the selection element
Main menu\Phone settings\Headset:
in
the main menu, which can be switched on or off there and must be set to “
On
” to enable the headset mode.
In addition to the shift menu key sequence, one of the inputs input1 – input3 can be used to expand the headset control
so that the pressed button that is connected at the selected input causes the activation/deactivation of the headset mode.
To do this, in the web interface
WebIp160\Device\Keypad
select one of the drop-down lists
input1 – input3
and
select the mode of operation “
Headset, press
” to use the input for expanded headset control.
3.4 Headset audio properties
Tab
WebIp160\Device\Audio\
of the web interface includes the Headset Type drop-down list and two check boxes
Headset Ringing and Headset Ringing only
, which can be used to set the audio properties of the headset
mode. In the drop-down list, the type of the connected headset can be selected , which is set to
Imtradex/Ecom
Instruments
by default. Via the two check boxes, which are switched off by default, the ring melody signal (ringing) can
be linked to the headset. For employees working in a noisy environment who use the headset as hearing protection, this
ensures that incoming calls will always be heard. Check the Headset Ringing check box if the ring melody signal (ringing)
should be played back via headset and speaker; use the
Headset Ringing only
,
if it should be played back through
the headset alone.
3.5 Function keys Shift 0-Shift 9
The
0
-
9
WXYZ
keys from the numeric keypad can be used in connection with the shift key to trigger configurable functions,
such as dialling a destination number. In the default setting the assigned function keys 1 – 10 are preset to "
Key not
assigned
" and therefore have no effect. Via the main menu
Main menu\User list\n UserName\Function key\f
FctKeyNo\
open the
Function key
dialog shown below, in the various fields of which the desired behavior of the
function key is to be set.
Type: Key not assigned
Type: Destination no.
Type:
Select the function type
Text:
[ Enter function name ]
Icon:
[ Select an icon ]
Number:
Enter destination number
Prepare:
Select Off|On
Type: Key not assigned
Function keys
Icon:
Number: 5012
Prepare:
Off
Function keys
Type: Destination no.
Text: F2
